Welcome to Gallay Motorsports

9000 lb FACTORY STOCK DIESEL

Axles, drive train, engine block must be O.E.M
O.E.M. Turbos, Intake & Exhaust Manifolds
Must be Street Legal
Must have license and proof of insurance
Street Driven
Duals are allowed
Must retain factory suspension, can not be blocked
Stock production frame( NO ALTERED FRAMES)
26" Hitch Height Maximum
NO MID MOUNT HITCHES. (No hook points forward from center of rear axle).
Hook Eye Point must be behind frame rails with a 3" hole past the end of the frame rails.
Recommended to have kill switch at the hook point
37" max. tire height . D.O.T. TIRES ONLY( NO AG TIRES, CUTS, SHAVED,ETC.)
Factory 4x4 wheelbase and track width
NO WEIGHT BARS ALLOWED.
NO TRACTION DEVICES ALLOWED
NO NITROUS
NO ALCOHOL
NO WATER INJECTION
NO PROPANE
NO AIR BAGS( MUST BE DEFLATED IF EQUIPPED)
NO BODY CUTTING OR GUTTING
Fuel tank must be in original location and functional
Must have#2 diesel fuel (NO OFF ROAD FUEL)
1 Ton or Smaller axles only
Hitch must be easily accessable
Tech.Committee has final decision on rules
NO PASSENGERS

8500 LB. STREET DIESEL

O.E.M. Axles,Drivetrain and Engine Blocks
Cross in exhaust down pipe
Must have valid license and proof of insurance
Street driven
Dual rear wheels allowed
Must retain factory suspension, May be blocked (must be removable)
Stock production 4x4 frame (NO ALTERED FRAMES)
26" Maximum hitch height
NO MID MOUNT HITCHES( NO HOOK POINTS FORWARD FROM CENTER OF REAR AXLE )
Hook eye point MUST be behind frame rails with a full 3" hole past rear frame rails
Recommended to have a kill switch at the hook point
35"MAX. D.O.T TIRE HEIGHT ( NO AG TIRES,CUTS, SHAVED, ETC.)
Factory 4x4 wheel base and track width
WEIGHT BARS ALLOWED IN BED ONLY
TRACTION DEVICES ALLOWED
MUST HAVE DRIVESHAFT LOOPS AND "U" JOINT SHIELDS ON FRONT AND REAR PINIONS
FUEL TANK MUST BE IN STOCK LOCATION AND FUNCTIONAL
NO BODY CUTTING OR GUTTING
NO NITROUS
NO ALCOHOL
NO PROPANE
1 TON OR SMALLER AXLES ONLY
MAX. 2.6 INDUCER ON TURBO
MAX. 4500 R.P.M
NO PASSENGERS
HITCH MUST BE EASILY ACCESSABLE
TECH. COMMITTEE HAS FINAL DECISION ON RULES

8000 LB OPEN DIESEL

O.E.M. DRIVE TRAIN
MUST HAVE S.F.I. BELLHOUSING OR TRANS. BLANKET
MAX. 26" HITCH HEIGHT
TRACTION DEVICES ALLOWED
BLOCKED REAR SUSPENSION ALLOWED
WEIGHT BARS ALLOWED (60" MAX. CENTER OF AXLE TO OUTSIDE OF WEIGHT)
MUST HAVE DRIVESHAFT LOOPS AND "U" JOINT SHIELDS ON FRONT AND REAR PINIONS
MUST HAVE KILL SWITCH AT HOOK POINT
35" MAX TIRE HEIGHT,D.O.T. ONLY (NO AG TIRES)
NO PASSENGERS
HOOK EYE POINT MUST BE BEHIND FRAME RAILS WITH A FULL 3" HOLE PAST END OF FRAME RAILS
TECH. COMMITTEE HAS FINAL DECISION ON RULES

6500 LB FACTORY STOCK GAS

6500 LB STREET STOCK GAS

1 TON OR LESS DRIVETRAIN
SINGLE CARB. (NO SUPERCHARGERS OR TURBOS)
NO NITROUS OR ALCOHOL
BLOWPROOF BELLHOUSING OR TRANS BLANKET HIGHLY RECOMMENDED
D.O.T. TIRES ONLY , 33X12.50 MAX. ACTUAL MEASURED TIRE SIZE,(NO CUTS)
60" MAX FROM FRONT AXLE CENTERLINE TO FRONT OF WEIGHTS
TRACTION DEVICES AND BLOCKED REAR SUSPENSION ALLOWED
MUST HAVE DRIVESHAFT LOOPS AND "U"JOINT SHIELDS ON FRONT AND REAR PINIONS
ALUMINUM INTAKE ALLOWED
OPEN HEADERS ALLOWED(NO HOOD HEADERS)
NO ALUMINUM HEADS
26"MAX. HITCH HEIGHT. NO PART OF HITCH, SUPPORT, OR BRACING SHOULD BE IN FRONT OR REAR AXLE CENTERLINE, AND NO HIGHER THAN 3" ABOVE FRAME RAILS, 3" OPENING FOR CHAIN HOOK.
NO FUEL CELLS AND OR BATTERIES IN CAB OF TRUCK
FACTORY O.E.M. 4X4 TRUCK FRAMES ONLY
UNDERHOOD INSPECTION IS MANDATORY
HITCH MUST BE EASILY ACCESSABLE
NO PASSENGERS
"450 H.P. AND UNDER"

6500 LB SUPER STOCK GAS

1 TON OR LESS O.E.M. DRIVETRAIN
SINGLE CARB ONLY(NO SUPERCHARGERS OR TURBOS)
NO ALCOHOL
NO NITROUS
BLOWPROOF BELLHOUSING OR TRANS BLANKET REQUIRED
33X12.50 MAX D.O.T TIRES ONLY, NO CUTS (ACTUAL MEASUREMENT OF TIRE SIZE)
ALUMINUM INTAKE ALLOWED
60" MAX. FROM FRONT AXLE CENTERLINE TO FRONT OF WEIGHTS
TRACTION DEVICES AND BLOCKED REAR SUSPENSION ALLOWED
MUST HAVE DRIVESHAFT LOOPS AND "U" JOINT SHIELDS FRONT AND REAR PINIONS
MUST HAVE KILL SWITCH
OPEN HEADERS ALLOWED(NO HOOD HEADERS)
NO FUEL CELLS AND OR BATTERIES IN CAB OF TRUCK
FACTORY O.E.M. 4X4 FRAMES ONLY
NO ALUMINUM HEADS
140" WHEELBASE AND OVER MUST DROP WEIGHT( TECH. COMMITTEE DISCRETION)
26" MAX. HITCH HEIGHT , NO PART OF HITCH, SUPPORT, OR BRACING SHOULD BE IN FRONT OF REAR AXLE CENTERLINE, AND NO HIGHER THAN 3" ABOVE ABOVE FRAME RAILS. 3" OPENING FOR CHAIN HOOK.
HITCH MUST BE EASILY ACCESSABLE
UNDERHOOD INSPECTION IS MANDATORY
NO PASSENGERS

6500 LB PRO STOCK GAS

NATURALLY ASPIRATED( NO TURBOS OR SUERCHARGERS)
HEADERS ALLOWED
ALUMINUM HEADS ALLOWED
OPEN HEADERS ALLOWED,ALSO HOOD HEADERS
MUST HAVE KILL SWITCH AT HOOK POINT
TRACTION DEVICES ALLOWED
NO FUEL CELL AND OR BATTERIES IN CAB
FACTORY 4X4 WHEELBASE AND TRACK WIDTH
FACTORY REAR SUSPENSION ONLY , ALLOWED TO BE BLOCKED
NO MID MOUNT HITCHES, NO PART OF HITCH, SUPPORT, OR BRACING SHOULD BE IN FRONT OF REAR AXLE CENTERLINE AND NO HIGHER THAN 3" ABOVE FRAME RAILS, 3" OPENING FOR CHAIN HOOK.
26" HITCH HEIGHT MAX.
MUST HAVE DRIVESHAFT LOOPS AND "U" JOINT SHIELDS ON FRONT AND REAR PINIONS
FACTORY O.E.M. 4X4 FRAME
35" MAX. D.O.T. TIRE HEIGHT (ACTUAL MEASUREMENT) NO CUTS!
1 TON OR SMALLER AXLES
NO CUTTING OR GUTTING OF BODY
NO NITROUS
NO PASSENGERS
60"MAX FROM FRONT AXLE CENTERLINE TO FRONT OF WEIGHTS

6500 LB OPEN

MAX. WEIGHT 6500 LB
26" MAX HITCH HEIGHT
KILL SWITCH MANDATORY
CUTS, PULLERS , AG TIRES ALLOWED
SANCTIONED TRUCKS ALLOWED
SFI BALANCER MANDATORY
MUST HAVE BLOWPROOF BELLHOUSING AND TRANS BLANKET
MUST HAVE DRIVESHAFT LOOPS AND "U' JOINT SHIELD ON FRONT AND REAR PINIONS
ITPA SAFETY RULES APPLY
"ANYTHING GOES" AS LONG AS IT MEETS ALL SAFETY REQUIREMENTS AND RULES, AND MUST BE DEEMED SAFE BY THE TECH. COMMITTEE .

4x4 - Truck - ATV - Dirt Drags